ENG
 Санкт-Петербург, ул. Ворошилова, 2   +7 (812) 326-10-56lab_equip@nnz.ru

Статьи, публикации

Краткое описание

Список научных публикаций с результатами исследований, в которых применялись приборы Anton Paar TriTec (CSM Instruments)

Заказать \ задать вопрос
1      Атомно Силовая микроскопия AFM

On the interfacial interaction between bituminous binders and mineral surfaces as present in asphalt mixtures.
Hartmut R. Fischer, E.C. Dillingh, C.G.M. Hermse
Applied Surface Science 265 (2013) 495– 499

2      Ультра Нано Индентирование UNHT

New methods of analyzing indentation experiments on very thin films
Han Li, Nicholas X. Randall and Joost J. Vlassak
Journal of Materials Research, Volume 25, Issue 04, 2010, pp 728-734

Disclosing the Mechanical Properties of Green Calcium-Silicate-Hydrates by Statistical Nanoindentation Techniques
Luca Sorelli, Daniel Vallée, Aali R. Alizadeh, James Beaudoin, Nicholas Randall
Advanced Materials Research Vol. 409 (2012) pp 544-549

A contribution to understanding of low-load spherical indentation—Comparison of tests on polymers and fused silica
Jiří Nohava and Jaroslav Menčík
Journal of Materials Research , Volume 27, Issue 01, 2012, pp 239-244

Nanoindentation of NiTi shape memory thin films at elevated temperatures
Xu Huang, Jiri Nohava, Bin Zhang,  A.G. Ramirez
International Journal of Smart and Nano Materials, Volume 2, Issue 1, 2011, pages 39-49

Ambient-curable polysiloxane coatings: structure and mechanical properties
Xiaobing Chen, Shuxue Zhou, Bo You, Limin Wu
Journal of Sol-Gel Science and Technology, May 2011, Volume 58, Issue 2, pp 490-500

3      Наноиндентивроание NHT

The use of non-contact AFM with nanoindentation techniques for measuring mechanical properties of carbon nitride thin films
S Chowdhury, M.T Laugier
Applied Surface Science, Volume 233, Issues 1–4, 30 June 2004, Pages 219–226

Comparison of nano-indentation hardness to microhardness
Linmao Qiana, Ming Lib, Zhongrong Zhoua, Hui Yanga, Xinyu Shia
Surface and Coatings Technology, Volume 195, Issues 2–3, 31 May 2005, Pages 264–271

Influence of Nitinol Wire Surface Preparation Procedures, on Cell Surface Interactions and Polymer Coating Adherence
W.M. Carroll, Y. Rochev, B. Clarke and M. Burke, D.J. Bradley and D.L. Plumley, J. Proft
Medical Device Materials (Proceedings of the Materials & Processes for Medical Devices Conference, 8-10 September 2003, Anaheim, CA)

Mechanical Properties of Nanolaminate Ti3SnC2 Carbide Determined by Nanohardness Cartography
Christophe Tromas, Nadia Ouabadi, Véronique Gauthier-Brunet, Michel Jaouen andSylvain Dubois
Journal of the American Ceramic Society
Volume 93, Issue 2, pages 330–333, February 2010

Effect of surfactant treated boehmite nanoparticles on properties of block copolymers
R. Adhikari, W. Brostow, T. Datashvili, S. Henning, B. Menard,
K. P. Menard and G. H. Michler
Materials Research Innovations, Volume 16, Issue 1 (February 2012), pp. 19-24

Identification of Stress-Strain Relation of Austenitic Steels By Instrumented Indentation
P. Haušild, J. Nohava, A. Materna
Chem. Listy 105, s676s679 (2011)

Multitechnique Investigation of Extruded Clay Brick Microstructure
Konrad J. Krakowiak1, Paulo B. Lourenço and Franz Josef Ulm
Journal of the American Ceramic Society, Volume 94, Issue 9, pages 3012–3022, September 2011

Characterisation of strain-induced martensite in a metastable austenitic stainless steel by nanoindentation
P. Haušild, J. Nohava and P. Pilvin
Strain, Volume 47, Issue Supplement s2, pages 129–133, December 2011

A Coupled Nanoindentation/SEM-EDS Study on Low Water/Cement Ratio Portland Cement Paste: Evidence for C–S–H/Ca(OH)2 Nanocomposites
Jeffrey J. Chen, Luca Sorelli, Matthieu Vandamme, Franz-Josef Ulm and Gilles Chanvillard
Journal of the American Ceramic Society, Volume 93, Issue 5, pages 1484–1493, May 2010

Depth-sensing indentation for assessing the mechanical properties of cold-sprayed Ta
Giovanni Bolelli, Benedetta Bonferroni, Heli Koivuluoto, Luca Lusvarghi, Petri Vuoristo
Surface and Coatings Technology, Volume 205, Issue 7, 25 December 2010, Pages 2209–2217

Amorphous carbon films PACVD in CH4–CO2 under pulsed and continuous substrate bias conditions
G. Gottardia N. Laidani, R. Bartali, M. Filippi, L. Calliari, R.S. Brusa, S. Mariazzi, C. Macchi, M. Anderle
Diamond and Related Materials, Volume 14, Issues 3–7, March–July 2005, Pages 1031–1035

Carbon film deposition on polyethylene terephthalate by pulsed-plasma technology
N. Laidania, R. Bartali, M. Anderle, P. Chiggiato, G. Chuste
Diamond & Related Materials, Volume 14 Issues 3–7, March–July 2005, Pages 1023–1030

Effects of substrate temperature on bonding structure and mechanical properties of amorphous carbon films
S. Chowdhury, M.T. Laugier, I.Z. Rahman
Thin Solid Films, Volumes 447–448, 30 January 2004, Pages 174–180

Measurement of the mechanical properties of carbon nitride thin films from the nanoindentation loading curve
S. Chowdhury , M.T. Laugier, I.Z. Rahman
Diamond and Related Materials, Volume 13, Issues 4–8, April–August 2004, Pages 1543–1548

Study of mechanical properties of CVD diamond on SiC substrates
S Chowdhury, E de Barra, M.T Laugier
Diamond and Related Materials, Volume 13, Issue 9, September 2004, Pages 1625–1631

Influence of the nucleation density on the structure and mechanical properties of ultrananocrystalline diamond films
C. Popova , G. Favaro, W. Kulisch, J.P. Reithmaier
Diamond and Related Materials, Volume 18, Issues 2–3, February–March 2009, Pages 151–154

Effect of target self-bias voltage on the mechanical properties of diamond-like carbon films deposited by RF magnetron sputtering
S. Chowdhury, M.T. Laugier, I.Z. Rahman
Thin Solid Films, Volume 468, Issues 1–2, 1 December 2004, Pages 149–154

A nanoindentation study of copper films on oxidised silicon substrates
D. Beegan, S. Chowdhury, M.T. Laugier
Surface and Coatings Technology
Volume 176, Issue 1, November–December 2003, Pages 124–130

The nanoindentation behaviour of hard and soft films on silicon substrates
D. Beegan, S. Chowdhury, M.T. Laugier
Thin Solid Films, Volume 466, Issues 1–2, 1 November 2004, Pages 167–174

Parametric study of an HVOF process for the deposition of nanostructured WC-Co coatings
Cecilia Bartuli, Teodoro Valente, Fabio Cipri, Edoardo Bemporad, Mario Tului
Journal of Thermal Spray Technology, June 2005, Volume 14, Issue 2, pp 187-195

Mechanical properties of PECVD hydrogenated amorphous carbon coatings via nanoindentation and nanoscratching techniques
P Bruno, G Cicala, A.M Losacco, P Decuzzi
Surface and Coatings Technology, Volumes 180–181, 1 March 2004, Pages 259–264

Mechanical properties of nanocrystalline diamond/amorphous carbon composite films prepared by microwave plasma chemical vapour deposition
W. Kulisch, C. Popov, S. Boycheva, L. Buforn, G. Favaro, N. Conte
Diamond and Related Materials
Volume 13, Issues 11–12, November–December 2004, Pages 1997–2002

Performance Improvement of Fuel Cells using Platinum Functionalized Aligned Carbon Nanotubes
Yuan Yuan, Joshua Smith, Gabriel Goenaga, Di-Jia Liu, Bo Zhou, Jingbo Liu
Clean Technology 2010, ISBN:978-1-4398-3419-0 Pages:482

Mechanical and tribological investigations of sol–gel derived SiO2 optical coatings
Darran R. Cairnsa, Aaron J. Kessmana, Paul J. Richtera, Frank J. Bottaria, Nicholas X. Randall
Wear, Volume 265, Issues 3–4, 31 July 2008, Pages 411–416

Spherical Load Indentation in Submicron NiTiCu Shape Memory Thin Films
R. Hassdorf, J. Feydt, S. Thienhaus, L. Buforn, N. Conté, O. Pykhteev, M. Kružík, N. Botkin and M. Moske
MRS Proceedings, Volume 841, 2004

Does microstructure matter for statistical nanoindentation techniques?
Franz-Josef Ulm, Matthieu Vandamme , Hamlin M. Jennings, James Vanzo, Michelle Bentivegna, Konrad J. Krakowiak, Georgios Constantinides, Christopher P. Bobko, Krystyn J. Van Vliet
Cement and Concrete Composites, Volume 32, Issue 1, January 2010, Pages 92–99

Work of indentation methods for determining copper film hardness
D. Beegan, S. Chowdhury, M.T. Laugier
Surface and Coatings Technology, Volume 192, Issue 1, 1 March 2005, Pages 57–63

Development of Microindentation Tests for the Specification Grading of Asphalt Cements
Ryan P. Marchildon, Simon A.M. Hesp
7-1400 Int. J. Pavement Res. Technol. 4(4):222-230 Copyright — Chinese Society of Pavement Engineering

Evolution of Contact Area and Pile-Up During The Nanoindentation of Soft Coatings on Hard Substrates
N. X. Randall and C. Julia-Schmutz
MRS Proceedings, Volume 522, 1998

Direct measurement of residual contact area and volume during the nanoindentation of coated materials as an alternative method of calculating hardness
Nicholas X. Randall
Philosophical Magazine A, Volume 82, Issue 10, 2002

Influence of deposition parameters on mechanical properties of sputter-deposited Cr2O3 thin films
P. Hones, F. Lévy and N. X. Randall
Journal of Materials Research, Volume 14, Issue 09, 1999, pp 3623-3629

Characterization of the Surface Mechanical Properties of Paints and Polymeric Surface Coatings
Nicholas X. Randall
Proceedings of the Paints & Coatings Expo, Tampa, Florida Jan 2006

Nanoindentation analysis as a two-dimensional tool for mapping the mechanical properties of complex surfaces
Nicholas X. Randall, Matthieu Vandamme and Franz-Josef Ulm
Journal of Materials Research, Volume 24, Issue 03, 2009, pp 679-690

Nanoindentation as a tool for characterising the mechanical properties of tribological transfer films
N.X Randall, A Harris
Wear, Volume 245, Issues 1–2, October 2000, Pages 196–203

GRID NANOINDENTATION ON MULTIPHASE MATERIALS FOR MAPPING THE MECHANICAL PROPERTIES OF COMPLEX MICROSTRUCTURES
Jiri Nohava, Petr Hausild, Nicholas X. Randall, Gregory Favaro
IMEKO 2010 TC3, TC5 and TC22 Conferences, Metrology in Modern Context, November 22!25, 2010, Pattaya, Chonburi, Thailand

Combining scanning force microscopy with nanoindentation for more complete characterisation of bulk and coated materials
N.X. Randalla, , C. Julia-Schmutza, J.M. Sorob
Surface and Coatings Technology, Volumes 108–109, 10 October 1998, Pages 489–495

4      Микроиндентирование MHT

Simultaneous determination of mechanical properties and physiologic parameters in living rat brain
Alexander V. Shulyakov, Farrah Fernando, Stefan S. Cenkowski, Marc R. Del Bigio
Biomechanics and Modeling in Mechanobiology, October 2009, Volume 8, Issue 5, pp 415-425

Effect of vacuum-treatment on deformation properties of PMMA bone cement
Fatima Zivica, Miroslav Babic, Nenad Grujovic, Slobodan Mitrovic, Gregory Favaro, Mihaela Caunii
Journal of the Mechanical Behavior of Biomedical Materials, Volume 5, Issue 1, January 2012, Pages 129–138

Spherical indentation response of metallic glasses
M.N.M. Patnaik, R. Narasimhan and U. Ramamurty
Acta Materialia, Volume 52, Issue 11, 21 June 2004, pp 3335–3345

Characterization of the mechanical properties of MEMS devices using nanoscale techniques
Authors:
Nicholas X. Randall
Proceedings of the SPIE, Volume 5716, p. 131-140 (2005)

Localised micro-hardness measurements with a combined scanning force microscope/nanoindentation system
N.X. Randall, R. Christoph, S. Droz, C. Julia-Schmutz
Thin Solid Films, Volumes 290–291, 15 December 1996, Pages 348–354

5      Микро-Комби тестер MCT (Микроиндентирование и Микро-скретч)

Determining the viscoelastic properties obtained by depth sensing microindentation of epoxy and polyester thermosets using a new phenomenological method
James G. Kohl, Norbert Schwarzer, Truc T. Ngo, Gregory Favaro, Eric Rengnet and Nick Bierwisch
Mater. Res. Express 2 (2015) 015301

Characterisation of the mechanical properties of MEMS devices using nanoscale techniques
Nicholas X. Randall and Richard A. J. Soden
Materials Research Society Symposium Proceedings Vol. 741, MRS 2003

Interesting aspects of indentation and scratch methods for characterization of thermally-sprayed coatings
Jiri Nohava , Benedetta Bonferroni , Giovanni Bolelli, Luca Lusvarghi
Surface & Coatings Technology 205 (2010) 1127–1131

Modified ball bond shear test for determination of adhesion strength of cold spray splats
Richard R. Chromik, Dina Goldbaum, J. Michael Shockley, Stephen Yue, Eric Irissou, Jean-Gabriel Legoux, Nicholas X. Randall
Surface and Coatings Technology, Volume 205, Issue 5, 25 November 2010, Pages 1409–1414

6      Нано Скретч Тест NST

Scratch and mar and other mechanical properties as a function of chemical structure for automotive refinish coatings
Basil V. Gregorovich, Karlis Adamsons, Li Lin
Progress in Organic Coatings, Volume 43, Issues 1–3, November 2001, Pages 175–187

A new approach to characterize scratch and mar resistance of automotive coatings
L. Lin, , G.S. Blackman, R.R. Matheson
Progress in Organic Coatings, Volume 40, Issues 1–4, December 2000, Pages 85–91

Quantitative characterization of scratch and mar behavior of polymer coatings
L. Lin, G.S. Blackman, R.R. Matheson
Materials Science and Engineering: A, Volume 317, Issues 1–2, 31 October 2001, Pages 163–170

Methods for characterizing the mar resistance
Michael Osterhold, Gerhard Wagner
Progress in Organic Coatings, Volume 45, Issue 4, December 2002, Pages 365–371

Characterizing physical surface properties
Michael Osterhold
European Coatings Journal Issue 09 ,2005, Page 34

Mechanical surface characterization: A promising procedure to screen organic coatings
A. Krupicka, M. Johansson, A. Hult, G. Favaro
Journal of Coatings Technology, April 2003, Volume 75, Issue 939, pp 19-27

Electropolymerized Tricopolymer Based on N-Pyrrole Derivatives as a Primer Coating for Improving the Performance of a Drug-Eluting Stent
Regina Okner, Yulia Shaulov, Noam Tal, Gregory Favaro, Abraham J. Domb, and Daniel Mandler
ACS Applied Materials and Interfaces. 2009, Apr;1(4), pp.758-67.

Mechanical characterization of polymeric films using depth-sensing instrument: Correlation between viscoelastic-plastic properties and scratch resistance
Hervé Pelletier, Christophe Mendibide, Antoine Riche
Progress in Organic Coatings, Volume 62, Issue 2, April 2008, Pages 162–178

The effect of weathering and thermal treatment on the scratch recovery characteristics of clearcoats
Christopher Seubert, Mark Nichols, Karen Henderson, Markus Mechtel, Thomas Klimmasch, Torsten Pohl
Journal of Coatings Technology and Research, March 2010, Volume 7, Issue 2, pp 159-166

New insights into the scratch resistance of clear coats as derived from comparative dry and wet nano-scratching
Rolf Nothhelfer-Richter, Eugen Klinke, Claus D. Eisenbach
8th Nuernberg Congress, Creative Advances in Coatings Technology, Vincentz Network, Hannover, Vol. II, 17 (2005)

Analysis of scratch characteristics of automotive clearcoats containing silane modified blocked isocyanates via carwash and nano-scratch tests
Seung M. Noh, Jae W. Lee, Joon H. Nam, Jong M. Park, Hyun W. Jung
Progress in Organic Coatings, Volume 74, Issue 1, May 2012, Pages 192–203

Scaling behavior in the scratching of automotive clearcoats
Christopher M. Seubert, Mark E. Nichols
Journal of Coatings Technology and Research, March 2007, Volume 4, Issue 1, pp 21-30

Micro- and Nano- Wear of Polymeric Materials
G.S. Blackman, L. Lin, and R.R. Matheson
ACS Symposium Series (2000), 741 (Microstructure and Microtribology of Polymer Surfaces), 258-269.

The nano-scratch tester (NST) as a new tool for assessing the strength of ultrathin hard coatings and the mar resistance of polymer films
R Consiglio, , N.X Randall, B Bellaton, J von Stebut
Thin Solid Films, Volume 332, Issues 1–2, 2 November 1998, Pages 151–156

Micro- and Nanopatterning of Inorganic and Polymeric Substrates by Indentation Lithography
Jinlong Gong, Darren J. Lipomi, Jiangdong Deng, Zhihong Nie, Xin Chen, Nicholas X. Randall , Rahul Nair and George M. Whitesides
Nano Lett., 2010, 10 (7), pp 2702–2708

7      Микро Скретч тест MST

Comparison between nanoindentation and scratch test hardness (scratch hardness) values of copper thin films on oxidised silicon substrates
D. Beegan, S. Chowdhury, M.T. Laugier
Surface & Coatings Technology, 201 (2007), pages 5804–5808

Brittleness of materials: implications for composites and a relation to impact strength
Witold Brostow , Haley E. Hagg Lobland
Journal of Materials Science; Jan2010, Vol. 45 Issue 1, p242

Fluoropolymer addition to an epoxy: phase inversion and tribological properties
Witold Brostow, Patrick E Cassidy, Haley E Hagg, Magdalena Jaklewicz, Pablo E Montemartini
Polymer, Volume 42, Issue 19, September 2001, Pages 7971–7977

Effect of the type of carbon nanotubes on tribological properties of polyamide 6
Luis F. Giraldo, Betty L. López and Witold Brostow
Polymer Engineering & Science, Special Issue, Volume 49, Issue 5, pages 896–902, May 2009

Copper viscoelasticity manifested in scratch recovery
Witold Brostow, Tea Datashvili, Robin McCarty, John B. White
Materials Chemistry and Physics 124 (2010) 371–376

Scratching as a Fracture Process: From Butter to Steel
A-T. Akono, P. M. Reis, and F-J. Ulm
Phys. Rev. Lett. 106, 204302 – Published 20 May 2011

Scratch Resistance of Polycarbonate Containing ZnO Nanoparticles: Effects of Sliding Direction
María Dolores Bermúdez, Witold Brostow, Francisco J. Carrión-Vilches and José Sanes
Journal of Nanoscience and Nanotechnology, Volume 10, Number 10, October 2010, pp. 6683-6689(7)

Characterization of orientation in polyethylene by scratch testing
Enrique Vigueras-Santiago, Susana Hernández-López, Marco A. Camacho- López, Witold Brostow
e-Polymers, Volume 10, Issue 1 (Dec 2010)

Friction and multiple scratch behavior of polymer + monomer liquid crystal systems
Marı´a Dolores Bermudez, Witold Brostow, Francisco Jose Carrion-Vilches
Juan Jose Cervantes, Dorota Pietkiewicz
Polymer, Volume 46, Issue 2, 12 January 2005, Pages 347–362

Predicting wear from mechanical properties of thermoplastic polymers
Witold Brostow and Haley E. Hagg Lobland
Polymer Engineering & Science, Special Issue: POLYCHAR 15, Volume 48, Issue 10, pages 1982–1985, October 2008

Scratch and abrasion properties of polyurethane-based micro- and nano-hybrid obturation materials
Miriam Estevez, J. Rogelio Rodriguez, Susana Vargas, J.A. Guerra, Witold Brostow and Haley E. Hagg Lobland
J Nanosci Nanotechnol. 2013 Jun;13(6): 4446-55

Reinforcement of Polymeric Latexes by In Situ Polymerization
Andres F. Vargas, Witold Brostow, Haley E. Hagg Lobland, Betty L. López, and Oscar Olea-Mejia
Journal of Nanoscience and Nanotechnology, Vol.9, 1–7, 2009

Scratch resistance of a polycarbonate + organoclay nanohybrid
A. Arribas, M.-D. Bermúdez, W. Brostow, F. J. Carrión-Vilches, O. Olea-Mejía
Polymer Letters Vol.3, No.10 (2009) 621–629

Characterization of Grooves in Scratch Resistance Testing
Witold Brostow, Wunpen Chonkaew, Reza Mirshams, Ashish Srivastava
Polymer Engineering & Science, Special Issue: POLYCHAR 15, Volume 48, Issue 10, pages 2060–2065, October 2008

Poly(butyl terephthalate)/oxytetramethylene + oxidized carbon nanotubes hybrids: Mechanical and tribological behavior
Witold Brostow, Georg Broza, Tea Datashvili , Haley E. Hagg Lobland, Agata Kopyniecka
Journal of Materials Research, Volume 27, Issue 14, 2012, pp 1815-1823.

TRIBOLOGY OF POLYMERS AND POLYMER-BASED COMPOSITES
Witold Brostow, Vera Kovačević, Domagoj Vrsaljko and Jenna Whitworth
Journal of Materials Education Vol.32 (5-6): 273 — 290 (2010)

Effects of Surface Plasma Treatment on Tribology of Thermoplastic Polymers
Alexander Bismarck, Witold Brostow, Rachel Chiu, Haley E. Hagg Lobland, Kingsley K.C. Ho
Polymer Engineering & Science, Special Issue: POLYCHAR 15 , Volume 48, Issue 10, pages 1971–1976, October 2008

Novel wear resistant and low toxicity dental obturation materials
Miriam Estévez, Susana Vargas, Victor M. Castaño, J. Rogelio Rodríguez,
Haley E. Hagg Lobland, Witold Brostow
Materials Letters, Volume 61, Issues 14–15, June 2007, Pages 3025–3029

Sliding wear, viscoelasticity, and brittleness of polymers
Witold Brostow, Haley E. Hagg Lobland and Moshe Narkisa
Journal of Materials Research , Volume 21 , Issue 09,2006, pp 2422-2428

Relationship between contact geometry and average plastic strain during scratch tests on amorphous polymers
Hervé Pelletier , Christian Gauthier, Robert Schirrer
Tribology International, Volume 43, Issue 4, April 2010, Pages 796–809

Surface and electrical properties of high density polyethylene + carbon black composites near the percolation threshold
Enrique Vigueras-Santiago, Hernández-López, Witold Brostow, Oscar Olea-Mejia, Omar Lara-Sanjuan
e-Polymers, Volume 10, Issue 1 (Dec 2010)

Determination of wear of surfaces by scratch testing
Witold Brostow, Gowrisankar Darmarla, Juliet Howe, Dorota Pietkiewicz
e-Polymers, Volume 4, Issue 1 (Dec 2004)

Preparation and Characterization of Poly(Lactic Acid)-g-Maleic Anhydride + Starch Blends
Victor H. Orozco, Witold Brostow, Wunpen Chonkaew and Betty L. López
Special Issue: POLYCHAR-16 World Forum on Advanced Materials, Volume 277, Issue 1, pages 69–80, February 2009

A novel approach for micro-scale characterization and modeling of geomaterials incorporating actual material heterogeneity
O. K. Mahabadi, N. X. Randall, Z. Zong, G. Grasselli
Geophysical Research Letter, Volume 39, Issue 1, January 2012

Experimental determination of the fracture toughness via microscratch tests: Application to polymers, ceramics, and metals
Ange-Therese Akono, Nicholas X. Randall, Franz-Josef Ulm
Journal of Materials Research, Volume 27, Issue 02, 2012, pp 485-493

8      Макро Скретч тест Revetest RST

An ASTM Standard for Quantitative Scratch Adhesion Testing of Thin, Hard Ceramic Coatings
Stephen T. Gonczy,  Nicholas Randall
International Journal of Applied Ceramic Technology, Volume 2, Issue 5, pages 422–428, September 2005

An investigation of scratch testing of silicone elastomer coatings with a thickness gradient
James G. Kohl, Nicholas X. Randall, Norbert Schwarzer, Truc T. Ngo, J. Michael Shockley and Rahul P. Nair
Journal of Applied Polymer Science, Volume 124, Issue 4, pages 2978–2986, 15 May 2012

Investigations on scratch behavior of various polyamides
J. John Rajesh, Jayashree Bijwe
Wear, Volume 259, Issues 1–6, July–August 2005, Pages 661–668

Scratch Damage in Zirconia Ceramics
Seung Kun Lee, Rajan Tandon, Michael J. Readey andBrian R. Lawn,
Journal of the American Ceramic Society, Volume 83, Issue 6, pages 1428–1432, June 2000

Scratch behavior of SiAlON ceramics
Ramasamy Sivakumar, Mark I. Jones, Kiyoshi Hirao, Wataru Kanematsu
Journal of the European Ceramic Society, Volume 26, Issue 3, 2006, Pages 351–359

An Attempt to Evaluate Cohesion in WC/Co/Cr Coatings by Controlled Scratching
H.M. Hawthorne, Y. Xie
Meccanica, 2001, Volume 36, Issue 6, pp 675-682

Scratch adhesion testing of plasma-sprayed yttria-stabilized zirconia coatings
D.K. Das, M.P. Srivastava, S.V. Joshi, R. Sivakumar
Surface and Coatings Technology,  Volume 46, Issue 3, September 1991, Pages 331–345

Standardization of a volumetric displacement measurement for two-body abrasion scratch test data analysis
Ryan L. Kobrick, David M. Klaus, Kenneth W. Street
Wear, Volume 270, Issues 9–10, 4 April 2011, Pages 650–657

Measurement of cohesion and adhesion strengths in alumina coatings produced by plasma spraying
E. Lopez, F. Beltzung, G. Zambelli
Journal of Materials Science Letters, March 1989, Volume 8, Issue 3, pp 346-348
Comparison of the adhesion of diamond coatings using indentation tests
and micro-Raman spectroscopy
Qi Hua Fan, J. Gracio, E. Pereira
Journal of Applied Physics (Impact Factor: 2.19). 11/1999; 86(10):5509-5514.

Co-sputtered Mo:S:C:Ti:B based coating for tribological applications
Ihsan Efeoglu
Surface and Coatings Technology, Volume 200, Issues 5–6, 21 November 2005, Pages 1724–1730

In-situ optical oblique observation of scratch testing
J.M. Wheeler, J. Wehrs, G. Favaro, J. Michler
Surface and Coatings Technology, Volume 258, 15 November 2014, Pages 127–133

A comparative study of the mechanical properties of PVD coatings evaluated by new techniques and conventional methods
S. Kamiya, H. Nagasawa, K. Yamanobe, H. Hanyu, M. Saka
Thin Solid Films, Volumes 469–470, 22 December 2004, Pages 248–253

9      Нано Трибометрия NTR

A Dynamic Scratch Test to Study Read/Write Head Degradation due to Head-Disk Interactions
Albert Wallash, Hong Zhu, and Du Chen
Magnetics, IEEE Transactions, Volume 44, Issue:11 Part 2, Nov. 2008

Adhesion and friction studies of microelectromechanical systems/nanoelectromechanical systems materials using a novel microtriboapparatus
Huiwen Liu and Bharat Bhushan
J. Vac. Sci. Technol. A 21, 1528 (2003)

Friction coefficient of soft contact lenses: measurements and modeling
A. C. Rennie, P. L. Dickrell, W. G. Sawyer
Tribology Letters, April 2005, Volume 18, Issue 4, pp 499-504

Macroscopic Friction Coefficient Measurements on Living Endothelial Cells
Alison C. Dunn, Toral D. Zaveri, Benjamin G. Keselowsky, W. Gregory Sawyer
Tribology Letters, August 2007, Volume 27, Issue 2, pp 233-238

Frictional anisotropy of oriented carbon nanotube surfaces
P.L. Dickrell, S.B. Sinnott, D.W. Hahn, N.R. Raravikar, L.S. Schadler, P.M. Ajayan, W.G. Sawyer
Tribology Letters, January 2005, Volume 18, Issue 1, pp 59-62

Biological microtribology: anisotropy in frictional forces of orthopteran attachment pads reflects the ultrastructure of a highly deformable material
Stanislav Gorb and Matthias Scherge
Proc Biol Sci. 2000 Jun 22; 267(1449): 1239–1244

A study of the frictional properties of senofilcon-A contact lenses
Bo Zhou, Yuanting Lib Nicholas X. Randalla Lei Li
Journal of the Mechanical Behavior of Biomedical Materials, Volume 4, Issue 7, October 2011, Pages 1336–1342

10  Трибометрия TRB

Optical In Situ Micro Tribometer for Analysis of Real Contact Area for Contact Mechanics, Adhesion, and Sliding Experiments
Brandon A. Krick, Jennifer R. Vail, Bo N. J. Persson, W. Gregory Sawyer
Tribology Letters, January 2012, Volume 45, Issue 1, pages 185-194

Nanocrystalline Ni-W Alloy Coating for Engineering Applications,
A.R. Jones, J. Hamann, A.C. Lund, C.A. Schuh,
Plating and Surface Finishing, 97, 52-60, 2010.

Tribological and mechanical properties of physical vapor deposited alpha alumina thin film coating
Aditya Aryasomayajula, N.X. Randalb, M.H. Gordon, D. Bhat
Thin Solid Films, Volume 517, Issue 2, 28 November 2008, Pages 819–823

Preliminary Study of the Effect of Micro-Scale Dimple Size on Friction and Wear under Oil-Lubricated Sliding Contact
Auezhan Amanov, Young Sik Pyun, Bin Zhang, Jeong Hyeon Park, Jiri Nohava
Tribology Online, Vol. 6 (2011) No. 7 P 284-290

The use of the pin-on-disk tribology test method to study three unique industrial applications
Rahul Premachandran Nair, Drew Griffin, Nicholas X. Randall
Wear, Volume 267, Issues 5–8, 15 June 2009, Pages 823–827

11  Высокотемпературная трибометрия THT

Tribological behavior of Stellite 21 modified with yttrium
Iulian Radu, D.Y. Li, R. Llewellyn
Wear, Volume 257, Issue 11, December 2004, Pages 1154–1166

Small punch creep testing: review on modelling and data interpretation
J P Rouse; F Cortellin1; W Sun; T H Hyde; J Shingledecker
Materials Science and Technology, Volume 29, Issue 11 (November 2013), pp. 1328-1345

12  Высокотемпературная вакуумная трибметрия VTHT

Graphene: a new emerging lubricant
Diana Berman, Ali Erdemir, Anirudha V. Sumant
Materials Today, Volume 17, Issue 1, January–February 2014, Pages 31–42

Conditions affecting the sliding tribological performance of selected coatings for high vacuum bearing applications
S.E. Franklin, J. Baranowska
Wear, Volume 263, Issues 7–12, 10 September 2007, Pages 1300–1305

Vacuum tribological behavior of the non-hydrogenated diamond-like carbon coatings against aluminum: Effect of running-in in ambient air
E. Konca, Y.-T. Cheng, A.M. Weiner, J.M. Dasch, A.T. Alpas
Wearб Volume 259, Issues 1–6, July–August 2005, Pages 795–799

13  Измерение толщины CALOWEAR

Calowear as an abrasion test for hard coatings
P.Voumard, N. Randall
Centre Suisse d’Electronique et de Microtechnique, Tribology Service Center.

 

 

 

Похожее оборудование
Продукт-менеджер направления: Трубицын Павел    +7 495 7828011 доб. 3506 p.trubicin@nnz.ru